Tower Bridge was built between 1886 and 1894 to a design by Horace Jones, with John Wolfe Barry as engineer, and the Prince and Princess of Wales opened it on 30 June 1894. It is often confused with London Bridge, the next crossing upstream, about 800 metres away.
By the late 19th century the East End was growing fast and needed a crossing downstream of London Bridge, but a fixed low bridge would have shut sailing ships out of the busy wharves of the Pool of London. The answer was a bridge that opens: the central span is divided into two bascules, or leaves, each counterweighted so that it can be raised in about five minutes. Beneath the stone cladding is a frame of more than 11,000 tons of steel; the stone was there to make the bridge sit comfortably beside the medieval Tower, as Parliament had required. The two side spans hang as suspension bridges.
The road deck is open to drivers, cyclists and people on foot, and river traffic still has priority: when a vessel needs to pass, road traffic waits. On 30 December 1952 a double-decker on route 78 was already on the south leaf when it began to rise, and its driver accelerated and jumped the gap onto the north leaf, which had stayed down.
The towers, walkways and engine rooms form the Tower Bridge Exhibition. The route starts at the North Tower, where displays introduce the architects, engineers and workers who built the bridge, and continues up to the two high-level walkways about 42 metres above the river. They give long views east and west across the city, taking in the Pool of London and the old fortress next door; both have glass floors, fitted in 2014, through which visitors look straight down on the road and the Thames. From the South Tower, a blue line on the ground leads to the Victorian Engine Rooms, in a separate building under the southern approach.
Those engine rooms hold the original steam engines and part of the hydraulic machinery that raised the bascules for more than 80 years: steam pumped water into accumulators, and the stored pressure drove the engines that moved the leaves. In 1974 the system was converted to electro-hydraulic power using oil.




